Items in are accesed through dropdown menus.
Items in Green are checkboxes that can be toggled.
The keywords are the items that in Orange that appear in the Gaussian Input File.
| Job Type Tab | |
|---|---|
| Job Type => Optimization | opt |
| Use RFO step | opt=rfo |
| Use Quadratic Macrostep | opt=quadmac |
| Use tight convergence | opt=tight |
| Optimize to a => TS (Berny) | opt=ts |
| Optimize to a => TS (QST2) | opt=qst2 |
| Optimize to a => TS (QST3) | opt=qst3 |
| Force Constants => Calculate at First Point | opt=calcfc |
| Force Constants => Calculate at all Points | opt=calcall |
| Force Constants => Read Internal | opt=readfc |
| Force Constants => Read Cartesian | opt=rcfc |
| Job Type => Frequency | freq |
| Compute VCD | freq=vcd |
| Save Normal Modes Options | freq=savenormalmodes |
| Skip diag. of full matrix | freq=nodiagfull |
| Select Normal Modes | freq=selectnormalmodes |
| Anharmonic Corrections | freq=anharmonic |
| Specify Anharmonic Modes | freq=selectanharmonicmodes |
| Compute projected frequencies | freq=projected |
| Compute Raman => No | freq=noraman |
| Compute Raman => Yes | freq=raman |
| Compute ROA => Yes | freq=roa |
| Read Incident Light Freqs => Yes | freq cphf=rdfreq |
| Read Incident Light Freqs => No | freq cphf=noread |
| Job Type => Opt+Freq | opt freq |
| Use RFO step | opt=rfo freq |
| Use tight convergence criteria | opt=tight freq |
| Compute VCD | opt freq=vcd |
| Save Normal Modes Options | opt freq=savenormalmodes |
| Skip diag. of full matrix | opt freq=nodiagfull |
| Select Normal Modes | opt freq=selectnormalmodes |
| Anharmonic Connections | opt freq=anharmonic |
| Specify Anharmonic Modes | opt freq=selectanharmonicmodes |
| Optimize to a => TS (Berny) | opt=ts freq |
| Force Constants => Calculate at First Point | opt=calcfc freq |
| Force Constants => Calculate at all Points | opt=calcall freq |
| Force Constants => Read Internal | opt=readfc freq |
| Force Constants => Read Cartesian | opt=rcfc freq |
| Compute Raman => No | opt freq=noraman |
| Compute Raman => Yes | opt freq=raman |
| Compute ROA => Yes | opt freq=roa |
| Read Incident Light Freqs => Yes | opt freq cphf=rdfreq |
| Read Incident Light Freqs => No | opt freq cphf=noread |
| Job Type => IRC | irc=calcfc |
| Do IRCMax calculation | ircmax=calcfc |
| Compute more points, N= | irc=maxpoints=n |
| Recalculate Force Constants Every nth Point, n = | irc=recalc=n |
| Follow IRC => Forward only | irc=forward |
| Follow IRC => Reverse only | irc=reverse |
| Force Constants => Calculate Always | irc=calcall |
| Force Constants => Read from .CHK | irc=rcfc |
| Recorrect Steps => Never | irc=recorrect=never |
| Recorrect Steps => Yes | irc=recorrect=yes |
| Recorrect Steps => Always | irc=recorrect=always |
| Recorrect Steps => Test | irc=recorrect=test |
| Job Type => Scan => Rigid | scan |
| Job type => Relaxed (Z-Matrix) | opt=z-matrix |
| Job type => Scan, Relaxed (Redundant Coord) | opt=modredundant |
| Job type => Stability | stable |
| Reoptimize the wavefunction | stable=opt |
| Job Type => NMR | nmr=giao |
| CSGT Method | nmr=csgt |
| IGAIM Method | nmr=igaim |
| CSGT, IGAIM and Single Origin | nmr=all |
| Compute spin-spin couplings (for all atoms) | nmr=spinspin |
| NMR=mixed | nmr=mixed |
| Method Tab | |
|---|---|
| Method => Mechanics => UFF | uff |
| Method => Mechanics => Dreiding | dreiding |
| Method => Mechanics => Amber | amber |
| QEq Charges => All Atoms | method=qeq |
| QEq Charges => Untyped Atoms | method=untyped |
| QEq Charges => Uncharged Atoms | method=uncharged |
| Method => Restricted | R prefix |
| Method => Unrestricted | U prefix |
| Method => Restricted-Open | RO prefix |
| Method => Semi-empirical => PM6 | pm6 |
| Method => Semi-empirical => PDDG | pddg |
| Method => Semi-empirical => AM1 | am1 |
| Method => Semi-empirical => PM3 | pm3 |
| Method => Semi-empirical => PM3MM | pm3mm |
| Method => Semi-empirical => INDO | indo |
| Method => Semi-empirical => CNDO | cndo |
| Method => Hartree-Fock | hf |
| Method => DFT => LSDA | lsda |
| Method => DFT => BVP86 | bvp86 |
| Method => DFT => B3LYP | b3lyp |
| Method => DFT => CAM-B3LYP | cam-b3lyp |
| Method => DFT => B3PW91 | b3pw91 |
| Method => DFT => MPW1PW91 | mpw1pw91 |
| Method => DFT => PBEPBE | pbepbe |
| Method => DFT => HSEH1PBE | hseh1pbe |
| Method => DFT => HCTH | hcth |
| Method => DFT => TPSSTPSS | tpsstpss |
| Method => DFT => WB97XD | wb97xd |
| Method => DFT => APFD | apfd |
| Method => MP2 | mp2 |
| Method => MP4 | mp4(sdtq) |
| Include all electrons | method=full |
| Method => CCSD | ccsd |
| Read Amplitudes | ccsd=readamplitudes |
| Save Amplitudes | ccsd=saveamplitudes |
| Method => BD | bd |
| Method => CASSCF | casscf |
| RFO Quadratic Step | casscf=rfo |
| Method => Compound => CBS-4M | cbs-4m |
| Method => Compound => CBS-Q | cbs-q |
| Method => Compound => CBS-QB3 | cbs-qb3 |
| Method => Compound => CBS-APNO | cbs-apno |
| Method => Compound => W1BD | w1bd |
| Method => Compound => W1U | w1u |
| Method => Compound => W1RO | w1ro |
| Method => Compound => G1 | g1 |
| Method => Compound => G2 | g2 |
| Method => Compound => G1 | g1 |
| Method => Compound => G3S | g3s |
| Method => Compound => G4 | g4 |
| Use sparse matrices | sparse |
| Multilayer ONIOM Model | oniom |
| Link0 Tab | |
|---|---|
| Memory Limit | %mem |
| Shared Processors | %nprocshared |
| Chkpoint File | %chk |
| OldChk File | %oldchk |
| Read-write File | %rwf |
| Linda Workers | %lindaworkers |
| General Tab | |
|---|---|
| Use Quadratically Convergent SCF | scf=qc |
| Ignore Symmetry | nosymm |
| Use Modified Redundant Coordinates | geom=modredundant |
| Use Counterpose | counterpoise= |
| Write Connectivity | geom=connectivity |
| Write Gaussian Fragment Data | fragment in molecule specification |
| Additional Print | #p |
| Write PDB Data | included in molecule specification |
| Compute Polarities | polar |
| Compute Optical Rotations | optrot |
| Read Incident Light Freqs => Yes | cphf=rdfreq |
| Read Incident Light Freqs => No | cphf=noread |
| Use MaxDisk= | maxdisk |
| Geometry => Molecule Specification | geom=check |
| Geometry => Title, ..., Molecule Specification | geom=allcheck |
| Force Constants => Read Internal | opt=readfc |
| Force Constants => Read Cartesian | opt=rcfc |
| MO Guess | guess=read |
| Guess Tab | |
|---|---|
| Guess Method => Core Hamiltonian | guess=core |
| Guess Method => Extended Huckel | guess=huckel |
| Guess Method => Read checkpoint File | guess=read |
| Guess Method => Read checkpoint if possible; otherwise generate | guess=tcheck |
| Guess Method => Read input checkpoint file | guess=input |
| Mix HOMO and LUMO orbitals | guess=mix |
| Always generate guess in optimizations | guess=always |
| Only do guess (no SCF) | guess=only |
| Localize Orbitals | guess=local |
| Save Orbitals to checkpoint file | guess=save |
| Permuted orbitals from MOs Dialog | guess=alter |
| Use fragments (atom groups) for generating guess | guess=fragment |
| Population Tab | |
|---|---|
| Level of Output => Full | pop=full |
| Level of Output => Regular | pop=regular |
| Level of Output => Minimal | pop=minimal |
| Level of Output => None | pop=none |
| At every geometry | pop=always |
| Merz-Kollman | pop=mk |
| Hirshfeld (CM5) Charges | pop=hirshfeld |
| Natural Transition Orbitals | pop=nto |
| Biorthogonalize orbitals | pop=biorth |
| Perform NBO calc => Full NBO | pop=nbo |
| Perform NBO calc => NPA only | pop=npa |
| Perform NBO calc => Full NBO (use NBO 6) | pop=nbo6 |
| Perform NBO calc => NPA only (use NBO 6) | pop=npa6 |
| Save orbitals to chk file => Save NLMOs | pop=savenlmos |
| Save orbitals to chk file => Save NBOs | pop=savenbos |
| Save orbitals to chk file => Save Mixture of NLMOs and NBOs | pop=savemixed |
| Save orbitals to chk file => Save NTOs | pop=savento |
| Save orbitals to chk file => Save Biorthogonalized | pop=savebiorth |
| Save changes for later MM => Save Mulliken | pop=savemulliken |
| Save changes for later MM => Save ESP | pop=saveesp |
| Save changes for later MM => Save NPA | pop=savenpa |
| Save changes for later MM => Save Hirshfeld | pop=savecm5 |
| Select density for analysis => Current | density=current |
| Select density for analysis => SCF | density=scf |
| Select density for analysis => MP2 | density=mp2 |
| Select density for analysis => Transition | density=transition |
| Select density for analysis => All Transitions | density=alltransition |
| Select density for analysis => CI | density=ci |
| Select density for analysis => QCI/CC | density=qci |
| Read density from checkpoint file | density=check |
| PBC Tab | |
|---|---|
| k-Space Integration Method => Gamma Point Only (k = 0) | pbc=gammaonly |
| k-Space Integration Method => Specify Number of Points | pbc=nkpoints |
| Solvation Tab | |
|---|---|
| Model => IEFPCM | scrf=iefpcm |
| Model => SMD | scrf=smd |
| Model => I-PCM | scrf=ipcm |
| Model => SCI-PCM | scrf=scipcm |
| Model => CPCM | scrf=cpcm |
| Model => Read checkpoint file | scrf=check |
| Solvent | solvent |
| Read additional input | scrf=read |